1. Laying method There are three kinds of laying methods for anti-corrosion wood at the moment of construction, namely: the idea of firm paving, the idea of sports paving, and the idea of floating paving. The idea of firmly laying the keel is necessary to fix the keel on the sky. When it is firm, you can use shrink screws. The material of these screws is preferably nylon. Due to the good anti-aging consequences, the iron shrink tube must be painted with anti-rust paint. Then lay the wood. The idea of the sports shop is to use stainless steel cross screws to connect the keel on the side of the wood, and use the screws to firmly fix the keel on the opposite side of the wood, and then put it into a whole. The idea is that after the keel is leveled at high altitude, it is connected into a frame or maybe a tic-tac-toe layout, and then the wood is laid.
Second, at the moment of design and construction of the lower layer of the wooden layout, there must be sufficient air circulation between the altitude and the wood to ensure better application life of the lower layer of the wooden layout.
3. When laying and installing and manufacturing the anticorrosive wood of Pinus sylvestris var. Mongolica, some gaps must be reserved between the timbers, so as to avoid the accumulation of rainwater or the shrinkage of the anticorrosive wood; when applying hardware, it is necessary to adopt stainless steel and hot galvanized Copper, it is necessary to drill holes after the installation, so as
