Qingfan wood industry_new Chinese style wooden antique scenic wood carving_folding wood carving manufacturer
Product advantage
In the design, sufficient attention should be paid to the structure here. Usually pay attention to the following points:
(1) The webs of the cantilever beam and the hanging beam should be in one-to-one correspondence to make the force clear and shorten the force transmission route; the webs near the corbel should be properly thickened, and the length of the thickened section should not be less than the height
⑵ Set end beams to strengthen, the width of the end beams should include the legs to form a whole
(3) The concave angle of the corbel should be gentle and avoid sharp corners to reduce the excessive concentration of the main tensile stress
⑷The height of the support at the shank should be reduced as much as possible, such as rubber support
⑸ Configure dense reinforcement according to the design calculation requirements, the reinforcement arrangement should be coordinated with the direction of the main tensile stress to prevent the concrete from cracking
