The first choice of materials for making anticorrosive wood pavilions is that there are many varieties of Pinus sylvestris, Southern Pine, Red Blood Pine, Fengsheng Garden Wood (Finland Wood), Radiation Pine, etc. on the market! For the production experience, design an effect diagram before production. The materials, specifications, and dimensions used for each design structure in the effect diagram need to be designed in advance. The design structure must be reasonable and consistent with the principle of mechanical balance, and the stress of wood must be considered. Production and installation of anti-corrosion wood: 1. The selected wood should be dried outdoors in advance to the same degree of humidity as outdoor humidity. Phenomenon such as deformation and cracking will occur after the construction of wood with large water content is completed. 2. During the construction process, the wood of the anticorrosive wood pavilion should be ventilated, and at the same time, the sun should be avoided. 3. In the construction process, try to use the existing size of the anti-corrosion wood to avoid the waste of the wood. During the on-site processing, all cuts should be painted with a professional anti-corrosion agent, so as to prolong the service life of the anti-corrosion wood. 4. Use long planks to reduce joints when constructing garden wooden pavilions and increase the aesthetics of anticorrosive wood pavilions. 5. Corrosion-resistant products such as galvanized connectors or stainless steel connectors should be used for the connection of the anticorrosive wood gazebo. It is strictly forbidden to use different types of metal links, otherwise it will soon rust and reduce the life. 6. In the production process of anticorrosive wood gazebo, it is necessary to punch holes with an electric drill first, and then fix it with screws to prevent artificial cracking and other losses. 7. The materials treated by the anticorrosive wood gazebo can play an antibacterial and antifungal effect, but the anticorrosive wood should be painted with protective paint on the surface after drying. Note that this work should be made on a sunny day, and after painting 24 hours of sunny conditions, so that the coating can form a film on the surface of the anticorrosive wood pavilion.
