The paint used by outdoor pavilions during maintenance is not only for good looks. Still in order to protect the use time of anticorrosive wood. The following editor of Guizhou anti-corrosion wood will introduce to you what problems need to be paid attention to when painting anti-corrosion wood? 1. Before wiping, soak the dust-free cloth evenly and squeeze out too much wax oil; apply force evenly when wiping, do not use excessive force or lightness, replace the surface of the coated object anyway. Wipe a few times, after all, wipe it evenly in the direction of the wood grain, so that the wood wax oil fully enters the wood grain, leave it to dry; after the surface is completely dry, quietly polish and wipe the surface of the coated object, and operate again in the same process . 2. Processing must be carried out at temperatures above 8 ° C. 3. Before applying wood wax oil, the surface of the anticorrosive wood must be polished with a fine emery cloth, and wiped until the surface is lubricated. If there are fibers on the surface of the wood, use wood sandpaper P240 or above to quietly sand. The above is an introduction to what issues need to be paid attention to when painting anticorrosive wood.