Preservative wood is called preservative wood because it does not decay. But do you know the cold knowledge that antiseptic wood will mold? Today we will talk about how to solve these problems if the preservative wood is moldy. 1. Why does the anticorrosive wood mold? Moulds like humid environment, so it is easy to mold without the dried logs, boards, veneers, etc., especially the sapwood of broadleaf wood. The mold of wood is usually limited to the surface layer or the shallow layer near the surface, and the hyphae will invade into the interior only under appropriate conditions. However, this is not a usable phenomenon, because the increase in permeability caused by this is not uniform in the wood. If such wood is subjected to a preservative treatment, the phenomenon of uneven distribution of the preservative inside the wood is often found.
Second, how to do mold of anticorrosive wood mold is very common, if the surface is moldy, you can spray Mrs. ash antifungal agent, so you can control the mold, outdoor use of anticorrosive wood must be coated with a varnish or wood wax oil This way, the anti-mildew effect is better. General anti-corrosive wood has a certain degree of prevention of rot and insects, but it has little effect on mold, so it must be protected against mildew, especially in the hot and humid climate areas in the southeast coast. Anti-corrosion wood is good for mold prevention and control, so it will not mold or rot, it is invincible!